👾
XCMKB
  • XCMKB Docs
  • Why Split Keyboard?
  • Why Columnar Staggered?
  • Why Integrated Pointing Device?
  • Keymap Principles
  • Purchasing Guide
    • Wired or Wireless
    • Keyboard Size
    • Switches
    • Keycap
    • Accessories
      • Travelling Bag
      • Tenting
  • User Manual
    • SoflePLUS2
    • CornePLUS2
    • Keyball 59 Knob
    • Corne Choc v1
    • Corne Joystick
    • Keyball61
    • Keyball44
    • Reviung42
  • Troubleshooting
    • Wired Build
    • Wireless Build
Powered by GitBook
On this page
  • Getting Started
  • Battery
  • 1500mAh Battery
  1. User Manual

Corne Joystick

User Manual & Troubleshooting for Wireless Corne MX Joystick

PreviousCorne Choc v1NextKeyball61

Last updated 2 months ago

Getting Started

You can use to remap it wirelessly, through webpage or software download. However, ZMK Studio has some limitations, read more . If you need more configuration options, you will have to fork , but this process is more complex, steps by steps can be found on .

Battery

Due to shipping restrictions, batteries cannot be shipped internationally. We can only deliver to adjacent countries via land transportation, such as Singapore, Thailand, Myanmar, and Vietnam. If we cannot ship a battery to your location, you will need to purchase it locally.

1500mAh Battery

Battery Specifications:

Steps to Procure the Battery Locally:

  1. Find a Local Seller: Locate a local electronics or battery supplier who can provide 504060 1500mAh batteries, or size within 40x60x5mm (width x length x thickness).

  2. Request for Socketing: Once you have the batteries, you’ll need to ask the seller to socket them with PH2.0 connectors. This will allow you to easily connect the battery to your device without the need for soldering.

  3. No Soldering Required: No soldering is required on your end. Simply ensure that the batteries are socketed and ready to be connected.

  4. Assembling the Battery: Remove the five screws from the bottom plates. Slot in the battery as shown in the photo.

For other issues, please check .

Troubleshooting - Wireless Build
ZMK Studio
zmk-new_corne
here
Wireless Build > Setup & Troubleshooting for ZMK Wireless Build > Github Action & Keymap Editor
1500mah lithium battery with 5mm thickness, 40mm x 60mm width x length, or any size that within this size, socketed with ph2.0 as photo
Unscrew the 5 top screws.
Lift the top plate up.
Insert socketed battery you prepared.
Image shows fully inserted.
Slant and slot in the battery
Done! Put the top plate back and screw the top 5 screws.